Home » Graphite Products » Segment Ring

Segment Ring

Original Design Manufacturing (ODM) Of Segment Ring
Segment rings are best produced custom because their designs rely on the diameters of the shafts. At ANSTAC, that is what we do. We can produce original designs based on your request and we are well-equipped to bring your particular design to reality down to the smallest detail.
Economical Planning With All Segment Ring Grades Availability
Inclusive of 3 Segment Rings-based Processes
When a mixture of raw materials is squeezed using a process called cold isostatic pressing (CIP), the final substance is referred to as isostatic graphite or isostatically moulded graphite. These graphites typically have the smallest particle sizes.
Extrusion is a manufacturing process where goods are produced with a certain form and shape by forcing fine carbon powder through a pre-shaped die. The grain size of extruded graphite is coarser than that of isostatic graphite.
Pressing carbon fibre into a mould produces moulded carbon. On the carbon, pressure is exerted, and the mould’s shape provides support. The properties of the shape will change depending on how precisely the graphite flows through the die.
Intricate Designing Of Segment Rings Can Be Achieved
3 And Higher Microns Of Approved Report
For customization of designs, ANSTAC is able to manufacture intricate designs with dynamic precision up to three (3) and higher microns. This segment ring can be made by them in great detail. We make certain to create the precise design you need, and we will even give you a draft quality assurance report. This is accomplished by confirming and contrasting the real product with the design requirements provided by our clients.
Benefits Of Using Segment Ring
This segment ring won’t react if it comes into contact with any chemical substances. This is due to the strong covalent connections that hold them together. They differ from most materials in having a longer life cycle because of this.
The melting point of graphite is greater than 3,600°C. The substance has numerous, massive covalent bonds that make it difficult to break, thus melting will necessitate a great deal of energy. But even at 3,600 °C, it won’t melt; instead, it will sublime. Thus, even under high-temperature situations, ANSTAC’s segment ring doesn’t melt.
Graphite has the ability to regulate temperature which safeguards products from the risk of thermal shock. Heat may easily be transferred through and absorbed by graphite because of its strong thermal conductivity.
The carbon atoms that make up graphite have four electrons in their outer shells. In graphite, one of these electrons is left free while the other three establish a stable link with other atoms. This delocalized electron, which is responsible for conducting electricity, moves through the material while transmitting charges from one place to another.
The strong layers of graphite can slide over one another rather effortlessly due to the weak van der Waals forces, giving the substance a self-lubricating property. Because of reason, it is also non-galling, extending the lifespan of your graphite items.
High compressive strengths are possible with graphite which makes them resilient. This quality is useful, especially during manufacturing processes.
Graphite has a single layer of graphene that serves as an incredibly effective shield. As a result, most solvents and acids, such as hydrochloric acid, sulfuric acid, and hydrofluoric acid, protect objects made of graphite against corrosion.
Long Service Life Segment Ring
These segment rings can be used for a long time before it breaks due to them being made of carbon graphite. Carbon graphite is generally durable and will
Mass Production Of Segment Rings Without Forgoing Customisation Demands
Our professionals will carefully design each product while keeping in mind your requests for customisation. Despite the fact that each product is made in enormous quantities, we pay great attention to every tiny detail.
Processes In Manufacturing Carbon-based Segment Ring

Company Analysis by ANSTAC
We’ll start by conducting a company study. ANSTAC will need to know what kind of product you’ll use, where you’ll use it, and how in order to create your things. To ensure that all rules are adhered to, we also inform you of MITI’s strategic trade restrictions.
Studying material types for Segment Ring
Next, we’ll check our inventory to see if we have any of the product’s grade material. The engineers then determine the necessary proportions based on the customer-submitted drawings after reviewing the layout using AutoCad software.

Send Quotation for Pricing
You will then receive a quote for the cost of your goods based on who will be paying for the freight—you or ANSTAC. and other influencing factors, including complexity and grade types.
Full Payment Following Client Confirmation of the Order
The payment procedure will then start after the clients have approved the product’s design, construction, and other parameters like the amount being manufactured. This process will involve validating customer orders.
Issuing of the Job Sheet
The marketing department of Anstac will then deliver the task sheet in accordance with the ISO management system. The permissible wastage parameters can not exceed 3%.

Cutting and Squaring of Segment Ring
The corners will now start to be squared (also known as milled). From this point on, they will decide how it is processed – with a precision of 10 microns or higher.
Profiling of the Segment Ring
Profiling the graphite to produce the final product’s shape is a process known as custom designing. Precision machinery is used here to meet tolerance specifications. The microns criterion must be satisfied in order for it to pass the quality control checkpoint. They will be put through an inspection using an electron microscope.


Sending Graphite Mould for QC Inspection and Checking
After the production process is finished, the segment ring will be sent for quality control inspection and checking. Engineers are sent one sample for review as part of quality control. They will check and do improvements to the products if necessary. However, once they decide everything is perfect, ANSTAC may begin producing the goods in large quantities.
Packing of Segment Ring
After the QC inspection is finished, we will begin packaging the products. All of the products will be put in a box and bubble-wrapped safely. For overseas sales, graphite products are shipped palletized.


Delivery of Segment Ring
Your goods will be moved to the loading bay area, where they will wait until the lorry is prepared. They will then be taken to the loading dock to load the cargo by trucks or other means of conveyance.
Segment Ring Production With Only Skilled ANSTAC Engineers

Due to the expertise and understanding of our team, we are equipped to interact with clients, respond to questions you may have about materials, and create products that are tailored to your requirements. Allowing the ANSTAC team to assist you will give you the peace of mind that you are maximizing the potential of your carbon applications thanks to our extensive knowledge and experience in the field.
Sustainable Practices With Segment Ring

In the state of Selangor, only a few landfills have been given permission to collect graphite trash. We only dispose of all of our garbage, including broken parts and graphite dust, in authorised landfills and abide by all relevant disposal laws in order to keep the environment safe.
Segment Ring Adhering To World-Standard Certifications
This segment ring is produced in accordance with international certifications, including Thailand BOI certification and ISO 9001 certification from both Malaysia and Thailand.

ISO 9001 (Malaysia)
In Malaysia, ANSTAC has been granted ISO 9001 accreditation. With this accreditation, ANSTAC has successfully demonstrated that they have complied with all quality standards and pertinent statutory and client criteria.

ISO 9001 (Thailand)
In Thailand, ANSTAC was also given ISO 9001 accreditation. The company’s dedication to the perfection of both its manufacturing process and its products is shown by the fact that it has received the certificate in two distinct nations.

Thailand Board of Investment (BOI)
The main government agency responsible for promoting investment possibilities in Thailand is the Board of Investment (BOI). By receiving this accreditation, ANSTAC can legally start a business in Thailand without being constrained by stringent restrictions and regulations.
Re-printing of Segment Ring Availability
Your customised design blueprints won’t be deleted even after the entire production process is complete. ANSTAC stores the identical product blueprint after it has been created in our internal storage. This will make it easier to produce and keep printing your customised products. If you need your previous customised segment rings to be made again at a moment’s notice, we may simply reproduce the blueprints and make them again.
Other Graphite Products
Get In Touch With ANSTAC Group
Don’t hesitate to send your questions, because we will definitely answer all of your questions as soon as possible.
Copyright © 2022 Anstac Group. All rights reserved